RIG FOR LEAK TEST OF FUEL AGGREGATE 🚀
This equipment is meant for leak check of fuel aggregate of aero engine in AMГ-10 oil medium with pressure of 300 kg/cm² at 35ºC.
Technical Specification:
- Working medium: OIL: AMГ-10
- Temperature of Oil: 35 ± 10 ºC
- Working pressure: 200-300 Kgf/cm²
- Flow rate: 6 LPM
- Fineness of filtration:
- a) 12-16 micron
- b) 5-8 micron
- System Purity Class: NAS 4 or better
EQUIPMENT FOR WASHING OF FUEL-OIL HEAT EXCHANGER 🔧
This equipment washes internal cavities of aero engine heat exchanger using Sinval solution and air pulses.
Technical Specification:
- Temperature of working medium: 60ºC
- Max Pressure:
- Liquid: 1-4 Kgf/cm²
- Air: 1-6 Kgf/cm²
- Fineness of Filtration: 40 micron
- Electrical Supply: Phase 3, Voltage 415 V ±10%, Frequency 50 ±1 Hz
EQUIPMENT FOR CHECKING SENSOR (DP-110) 🛰️
Device ‘PE-259’ checks functionality of DP-110 induction-type position sensor. Includes rectangular case, toggle/push buttons, LED indicator, and connector. Powered by two 1.5V AA batteries (3V total).
Technical Specification:
- Device Voltage: 3 V
- Voltage for DP-110 sensor: 1.5 V
- Current for DP-110 sensor: 10 mA
CRANKING SYSTEM OF TURBO COMPRESSOR STAGES 🌌
Endoscopy of HP and LP turbo compressor blades to check nicks and dents. Rotor speed is stepless controllable and can rotate in reverse to verify blade condition.
Technical Specification:
- Number of systems: 2 (LP and HP spools)
- Motor: DC Gearmotor
- Direction of rotation: Bi-directional
- Speed control: Infinitely variable by potentiometer
- Torque: 0.02 N-m (min) @ 0.5 RPM to 0.5 N-m @ 5 RPM
- Speed at output: 0.5 to 5 RPM
- Wattage: 100 W approx
- Voltage: DC 24 V
- Control: Foot pedal near system with override